This is my linbpq/bgpq32.cfg file, initial configuration was just for winlink(RMS Gateway), RED aka PE1RRR reconfig my node to any other features. BBS, CHAR etc. unfortunately he passed away.
the node runs perfectly, linbpq updated regularly.
; Written by BPQConfigGen
LINMAIL ; Enable BBS
LINCHAT ; Enable CHAT
BBS=1
NODE=1
NODECALL=YD0BCX ; If you change this to add an SSID, also change the APRSDIGI section.
NODEALIAS=BCXNET
MAPCOMMENT=<b>YD0BCX BPQ32 Node</b><BR>YD0BCX-3.....BBS<BR>YD0BCX-10....RMS<BR>YD0BCX-4.....CHAT<BR>144.390MHz<BR>Jakarta, ID<BR><a href="https://kutukupret.com">kutukupret.com</a>
LOCATOR=OI33KT
PASSWORD=***** ; For remote sysop prompt to 'password' command
EnableM0LTEMap=1
OBSINIT=6 ; Initial obsolescence set when a node is included
; in a received nodes broadcast. This value is then
; decremented by 1 every NODESINTERVAL.
OBSMIN=4 ; When the obsolescence of a node falls below this
; value that node's information is not included in
; a subsequent nodes broadcast.
NODESINTERVAL=30 ; Nodes broadcast interval in minutes
IDINTERVAL=10 ; 'IDMSG' UI broadcast interval in minutes, 0=OFF
BTINTERVAL=15 ; The BTEXT broadcast interval in minutes, 0=OFF
L3TIMETOLIVE=20 ; Max L3 hops
L4RETRIES=3 ; Level 4 retry count
L4TIMEOUT=60 ; Level 4 timeout in seconds s/b > FRACK x RETRIES
L4DELAY=10 ; Level 4 delayed ack timer in seconds
L4WINDOW=4 ; Level 4 window size
MAXCIRCUITS=160 ; If all 64 application streams are allocated = 128. + 32 (16 Node hopper people)
MAXLINKS=192 ; MAXCIRCUITS + 32 more for individual AX25 Up and down linkers
MAXNODES=1000 ; Max nodes in nodes table
MAXROUTES=144 ; Number of AXIP MAP neighbours (max 128) + Potential RF routes
MINQUAL=143 ; calibrated for 192: 146 = 1 hops. 144 = 2 hop.Minimum quality to add to nodes table (finely tuned!)
; INP3 Routing is experimental. The two parms which follow will be ignored
; unless activated in the ROUTES: section.
MAXHOPS=4 ; INP3 hop limit to add to tables
MAXRTT=90 ; INP3 max RTT in seconds
;BUFFERS=255 ; This parameter is no longer used in the Win32 version.
; BPQ32 allocates an adequate number automatically.
; I have the line commented out just to remind me it's gone!!
; TNC default parameters:
PACLEN=128 ; Max packet size (236 max for net/rom)
; 236 is suitable for reliable and fast connections, such
; as AX/IP/UDP or a dedicated 9600 RF Link
; 120 is suitable for a typical shared VHF packet radio connection
; PACLEN is defined for each port individually in the ports sections
; Level 2 Parameters:
; T1 (FRACK), T2 (RESPTIME) and N2 (RETRIES) are now in the PORTS section
T3=120 ; Link validation timer in seconds
IDLETIME=720 ; Idle link shutdown timer in seconds
; Configuration Options:
AUTOSAVE=1 ; Saves BPQNODES.dat upon program exit, 0= Disabled so edits are possible.
SAVEMH=1
HIDENODES=1 ; If set to 1, nodes beginning with a #
; require a 'N *' command to be displayed.
FULL_CTEXT=1 ; 0=send CTEXT to L2 connects to NODEALIAS only
; 1=send CTEXT to all connectees
/*
The *** LINKED command is intended for use by gateway software, and concern
has been expressed that it could be misused. It is recommended that it be
disabled (=N) if unneeded.
*/
ENABLE_LINKED=N ; Controls processing of *** LINKED command
; Y = allows unrestricted use
; A = allows use by application program
; N = disabled
INFOMSG:
YD0BCX LinBPQ Packet/Switch Node
Computer : STB HG680P
Software : Linux aml 5.1.0-aml-s905 / Linbpq 6.0.24.40
Rx/Tx : YAESU FT-2980R / BAOFENG UV-5R
Modem : DireWolf
Antenne : G7
Sysop Hari Hendaryanto
Sysop-email : YD0BCX@YD0BCX.#JKT.IDN.ASIA
winlink-email : YD0BCX@winlink.org
E-mail : harihend1973@gmail.com
Have Fun
****
IDMSG:
Winlink Gateway YD0BCX-10
****
BTEXT:
=0611.55S/10651.23E- {BPQ32}
YD0BCX's LinBPQ Gateway
****
CTEXT:
Type ? for list of available commands.
****
PORT
PORTNUM=1
ID=Telnet Server
DRIVER=TELNET
CONFIG
LOGGING=1
CMDPORT=63000 63500 63600 63700 3600 63102 63103
TCPPORT=8010
FBBPORT=8011
HTTPPORT=8080
MAXSESSIONS=30
DisconnectOnClose=1
LOGINPROMPT=callsign:
PASSWORDPROMPT=password:
CMS=1
CMSCALL=YD0BCX
CMSPASS=J1ngkr4k
FALLBACKTORELAY=1 ; will try to get to RMS RELAY if CMS unavailable
RELAYHOST=127.0.0.1 ; put the name or ip number of your RMS_RELAY here
RELAYAPPL=BBS
CTEXT= Welcome to\n __ _____ __ ___ _____ __\n \ \ / / \ / \| _ )/ __\ \/ /\n \ V /| |) | () | _ \ (__ > < \n |_| |___/ \__/|___/
\___/_/\_\\n\n Telnet Server.\n Press ? For list of commands\n\nYD0BCX>\n
USER=YD0BCX,*****,YD0BCX,,SYSOP;
USER=PE1RRR,*****,PE1RRR,,SYSOP;
USER=YB8XM,*****,YB8XM,,;
ENDPORT
PORT
PORTNUM=3 ; Port number
ID=AX/IP/UDP Wormholes ; Displayed by PORTS command
DRIVER=BPQAXIP ; Uses BPQAXIP
QUALITY=192 ; Quality factor applied to node broadcasts heard on
MINQUAL=100 ; Entries in the nodes table with qualities greater or
FRACK=5000 ; Level 2 timeout in milliseconds
RESPTIME=1000 ; Level 2 delayed ack timer in milliseconds
RETRIES=5 ; Level 2 maximum retry value
PACLEN=236 ; Maximum packet length
MAXFRAME=6 ; Max outstanding frames (1 thru 7)
CONFIG ; Driver specific configuration from here to ENDPORT
MHEARD ; Keep heard stats
UDP 10093 ; UDP port
UDP 10092 ; UDP port
;AUTOADDMAP ; Automatically add new connections
BROADCAST NODES ; Broadcast
BROADCAST ID
;MAP mm0rjj-4 mm0rjj-4.ddns.net UDP 10093 SOURCEPORT 10093 KEEPALIVE B
MAP GB7RJJ-7 GB7RJJ.ddns.net UDP 10093 SOURCEPORT 10093 KEEPALIVE B
;MAP F1GHX-2 F1GHX.DDNS.NET UDP 10093 SOURCEPORT 10093 B
; Moved to TCP on Port 4
;MAP VE3CGR-7 ve3cgr.dyndns.org UDP 10093 SOURCEPORT 10093 B
;map pe1rrr-5 rrrnet.ehvairport.com udp 10092 sourceport 10092 b ; test
;map pe1rrr-7 static.ehvairport.com udp 10093 sourceport 10093 b ; connection to pe1rrr's cortex node
ENDPORT
PORT
PORTNUM=4 ; Port number
ID=TCP Wormholes ; Displayed by PORTS command
DRIVER=BPQAXIP ; Uses BPQAXIP
QUALITY=192 ; Quality factor applied to node broadcasts heard on
MINQUAL=100 ; Entries in the nodes table with qualities greater or
FRACK=5000 ; Level 2 timeout in milliseconds
RESPTIME=1000 ; Level 2 delayed ack timer in milliseconds
RETRIES=5 ; Level 2 maximum retry value
PACLEN=236 ; Maximum packet length
MAXFRAME=6 ; Max outstanding frames (1 thru 7)
CONFIG ; Driver specific configuration from here to ENDPORT
MHEARD ; Keep heard stats
BROADCAST NODES ; Broadcast
BROADCAST ID
map pe1rrr-7 static.ehvairport.com TCP-Master 10194 B ;
map pe1rrr-5 rrrnet.ehvairport.com TCP-Master 10195 B ;
map ve3cgr-7 ve3cgr.dyndns.org TCP-Master 10196 B ;
;map f1ghx-2 f1ghx.ddns.net TCP-Master 10197 B ;
map pi1ztm pi1ztm.ddns.net TCP-Master 10198 B ;
map wa3wlh-7 wa3wlh.duckdns.org TCP-Master 10202 B ;
map WW6Q-7 ww6q.ddns.net TCP-Master 10203 B ;
ENDPORT
PORT
PORTNUM=5
ID=COM5 Bridge to XASTIR
TYPE=ASYNC
PROTOCOL=KISS
QUALITY=0
COMPORT=com5
CHANNEL=A
SPEED=9600
MAXFRAME=6
FRACK=5000
RESPTIME=1000
RETRIES=10
PACLEN=236
ENDPORT
PORT
PORTNUM=2
ID=AGW Port 144.390Mhz 1200
DRIVER=UZ7HO
CHANNEL=A
;PACLEN=100
QUALITY=0
MAXFRAME=4
FULLDUP=0
FRACK=8000
RESPTIME=3000
RETRIES=10
PACLEN=128
TXDELAY=350
SLOTTIME=100
PERSIST=64
KISSOPTIONS=ACKMODE
CONFIG
ADDR 127.0.0.1 8000
MAXSESSIONS=10
;WL2KREPORT PUBLIC, api.winlink.org, 80, YD0BCX, OI33kt, 00-23, 144390000, PKT1200, 10, 3, 5, 0
ENDPORT
ROUTES:
;PE1RRR-5,192,3 ; Override to ensure chat server connects via hub link
****
APPLICATION 1,BBS,,YD0BCX-3,BCXBBS,254
APPLICATION 2,CHAT,,YD0BCX-4,BCXCHT,254
APPLICATION 3,RMS,C 1 CMS,YD0BCX-10,BCXRMS,254
APPLICATION 7,APP,C 1 HOST 0 S
APPLICATION 8,IQUAKE,C 1 HOST 1 S
APPLICATION 9,IWX,C 1 HOST 2 S
APPLICATION 10,QUOTES,C 1 HOST 3 S
;APPLICATION 11,APRSTDAY,C 1 HOST 6 S
; Some extra resources - MAX Application number is 32
APPLICATION 22,DXC,C PE1RRR-9
APPLICATION 24,GAMES,C PE1RRR-6
APPLICATION 26,RRRCHT,C PE1RRR-4
APPLICATION 28,WALL,C 1 HOST 5,YD0BCX-2,BCXWAL,254
APPLICATION 30,WWCONV,C 1 HOST 4 S,YD0BCX-11,BCXCNV,254
APPLICATION 31,WWW,C PE1RRR-10
APPLICATION 32,TALK,ATTACH 1 10.10.10.240 8015 S,YD0BCX-15,,0
